|
|
|
||
|
Complete DataWindows System with 32 Channel MX32USB Data Acquisition Interface Box, a notebook computer and DataWindows Software License. | DW32USBN | |
|
|
32 Channel MX32USB Data Acquisition Interface Box with DataWindows Software License. | MX32USB |
|
|
|
||
|
Digital SIOC Breakout Kit . Breaks out signals from Novellus Systems Digital SIOCs. | DSIOC | |
|
MFC 15 Pin Dsub Breakout Kit . Breaks out set and read signals from MFC’s with 15 pin D-Subminiature connectors. | MX-1000-DB15 | |
|
Manometer 15 Pin DSub Breakout Kit. Connect to the pressure signal from Tylan General Manometers with 15 pin D-Subminiature connectors. One MX-0001 Cable required for each kit. | MX-1003-DB15 | |
|
Pneumatic Valve Indicator Kit This sensor tees into pneumatic lines to produce a 0 to 5V digital signal which indicates valve state. 100 psi maximum pressure. | MX-1002 | |
|
MFC Card Edge Breakout Kit Breaks out set and read signals from MFC’s with card edge connectors. | MX-1000-CE | |
|
Thermocouple Adapter Thermocouple to MX32 D connector adapter (please specify type J or K). | MX-TCx
x = J or K |
|
|
GND Cable Ground Cable used to provide a ground reference for MX32USB input signals. | MX-1010 | |
| LFC Tip Plug Cable Kit. Connect to LFC set and read tip plug connectors. One kit required for each signal. | MX-1004 | ||
| Manometer Screw Terminal Kit. Connect to the pressure signal from Tylan General Manometers with screw terminal connectors. | MX-1003-ST | ||
| Minigrabber Adapter. Connect signals to the MX-32 breakout board with Minigrabbers (1 black and 1 red Minigrabber). | MX-1005 | ||
| 24 Volt to 5 Volt Reduction Adapter. Reduce 24 V signals to 5 V for measurement with the MX-32 breakout board (1 black Minigrabber and 1 red Minigrabber). | MX-1006 | ||
| MX-0001 Cable. Connect signals to the MX32 Breakout Board with this 3 meter 9 pin male to 9 pin female D connector cable. | MX-0001 |